AD-10 Plus 3G GSM Alarm SMS and Call Dialler, 8 Inputs

AD-10 Plus 3G GSM Alarm SMS and Call Dialler

Our AD-10 Plus GSM Alarm SMS and Call Dialler, is a simple, 3G GSM dialler with 8 Inputs which will send a custom SMS message and/or a phone call (no voice message) to up to 6 programmable numbers, for example 3 SMS recipients and 3 call recipients.

Each input can send a seperate custom message when triggered and these inputs can be programmed for normally open or normally closed operation and can be 'armed' and 'disarmed' indipendantly if required.

The AD-10 Plus also has a low current consumption mode and low voltage monitoring so can send an SMS message when a programmed low voltage threshold is reached, ideal if this GSM dialler was to be powered from a battery for example.

Although our GSM dialler is commonly used in intruder alarm installations, it can also be used as a stand alone dialler for other purposes as it lends itself to direct connection detectors or relay outputs so is ideal for monitoring industrial applications.

The dialler uses a Pay-AS-You-Go or contact SIM card and works with any major network that supports 2G signalling (ALL UK networks such as O2, GiffGaff, EE, 1p mobile, Vodaphone are all compatible, however, 3 and its psudeo networks like Smarty are not compatible) 

Programming is very straight forward and is achieved by sending SMS commands to the GSM diallers number.

MAIN FEATURES

8 Inputs with programmable custom alarm messages
Custom SMS messages and/or Call for recipient
Easy to set up
P-A-Y-G or contract SIM
Wide power input 5VDC to 15VDC
Can program inputs to NC or NO operation
Can program inputs individually for ON or OFF
Low current consumption mode
Low Voltage monitoring

Whats included

AD-10 Plus GSM Dialler
Screw on Stubby Antenna
Trigger Input Cable
Manual